Forum Thread
(Lake Weatherford Specific)
0 messages
Updated
Lakes Online Forum
83,589 messages
Updated 4/19/2024 5:02:06 PM
Lakes Online Forum
5,193 messages
Updated 4/3/2024 3:47:36 AM
(Lake Weatherford Specific)
0 messages
Updated
Lakes Online Forum
4,169 messages
Updated 4/15/2024 11:05:05 PM
Lakes Online Forum
4,260 messages
Updated 3/24/2024 9:24:45 AM
Lakes Online Forum
2,976 messages
Updated 3/20/2024 11:53:43 PM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
Lake Weatherford Photo Gallery





    
Name:   Flurman - Email Member
Subject:   Backing up a trailer
Date:   4/29/2012 1:24:28 PM

The guy at the marina was backing up my trailer and did not have the electrical plugged in. Someone watching suggested my brakes aren't working because without the reverse lights disengaging the brakes, he should not have been able to back up. My question is, since no electrical was hooked up, would the brakes ever engage ?



Name:   JIM - Email Member
Subject:   Backing up a trailer
Date:   4/29/2012 6:27:36 PM

Depends on what type of brakes are on the trailer, if any at all.



Name:   mckaygmc - Email Member
Subject:   Backing up a trailer
Date:   4/29/2012 9:12:20 PM

If the Boat was not on the trailer or if he was backing down a hill they may not have enguaged either.



Name:   Ulysses E. McGill - Email Member
Subject:   Backing up a trailer
Date:   4/30/2012 2:35:11 AM (updated 4/30/2012 2:44:13 AM)

Surge brakes work as the weight of the boat surges forward and they are not dependent on electric from the vehicle. For backing, there is an override that disables the surge brakes when the vehicle is placed in reverse if the trailer is hooked to the vehicles electric system (this overrides breaking during  compression of the system and therefore prevents braking as the vehicle pushes backwards).....surge brakes can also be easily disabled manually for backing if no electric connection is available. If you are backing down hill, it is usually not a factor because the surge mechanism will not compress.

If you have electric breaks (very uncommon on boat trailers), they will not engage at all unless hooked up to the vehicles electric system.



Name:   Flurman - Email Member
Subject:   Backing up a trailer
Date:   4/30/2012 9:20:25 AM

The boat was on the trailer and he did back up hill. So, it sounds like my brakes don't work. Anyone have suggestions on where to take a trailor to get the brakes checked ? Do auto brake shops do this ?



Name:   Ulysses E. McGill - Email Member
Subject:   Backing up a trailer
Date:   4/30/2012 11:46:42 AM (updated 4/30/2012 11:51:08 AM)

The brakes may be fine if he disabled them....all it takes is a small metal disk that is placed in the surge mechanism for backing . Any marine shop person would probably have one in his pocket and know how to use it (they do this all the time); I'd start with checking that first (ask if he disabled the brakes for backing). If thats not it,  check to see if something else is restricting the surge mechanism. If that checks with no restrictions (you get compression when backing), check the hydraulic level in the surge mechanism.



Name:   GoneFishin - Email Member
Subject:   Backing up a trailer
Date:   4/30/2012 11:53:14 AM

Attach the trailer to your car and take it to the same marina and ask them to test it out. Tell them your concern.



Name:   mckaygmc - Email Member
Subject:   Backing up a trailer
Date:   4/30/2012 4:42:44 PM


Friend of mine bought a used Sea Ray from the dealer. When he got home he was concerned it didnt"Feel" like the brakes where working....Founf the disc UEM was talking about Electrical Taped in place...May want to check that too..lol



Name:   Flurman - Email Member
Subject:   Backing up a trailer
Date:   5/2/2012 2:46:24 PM

Thanks for the advice.







Quick Links
Lake Weatherford News
Lake Weatherford Photos
Lake Weatherford Videos




About Us
Contact Us
Site Map
Search Site
Advertise With Us
   
Weatherford.LakesOnline.com
THE LAKE WEATHERFORD WEBSITE

Copyright 2024, Lakes Online
Privacy    |    Legal