Forum Thread
(Bankhead Lake Specific)
3 messages
Updated 2/8/2012 8:19:41 PM
Lakes Online Forum
51,434 messages
Updated 11/18/2017 12:01:24 AM
Lakes Online Forum
4,880 messages
Updated 11/14/2017 11:56:59 PM
(Bankhead Lake Specific)
0 messages
Updated
Lakes Online Forum
3,804 messages
Updated 11/15/2017 5:51:51 AM
Lakes Online Forum
4,147 messages
Updated 11/4/2017 4:12:51 PM
Lakes Online Forum
2,870 messages
Updated 11/16/2017 11:52:39 AM
Lakes Online Forum
64 messages
Updated 7/25/2017 1:09:38 AM
Bankhead Lake Photo Gallery

    
    Back | Search | Photos | News | Chat | Topics Forum

Name:   GC - Email Member Reply
Subject:   Need recommendations
Date:   8/20/2017 7:36:23 PM   IP ADDRESS: 64.130.112.34

i have a wench mounted to the concrete floor of the boat house that pulls my ski nautique up a pretty steep that I installed in the 90's mounted on a one inch steel plate.  I am worried that the four bolts that hold it to the concrete may have weakened of time.  No evidence of that but I want someone who can weld two plates on each side with two more bolts into the concrete to ease my mind.  So need someone to get to steel planes, drill two holes in each, set bolts in the concrete and then weld the plates to the steel plate.  Any ideas on who could do that with no big rush?  Thanks in advance.





Name:   Firefighter - Email Member Reply
Subject:   Need recommendations
Date:   8/20/2017 9:13:44 PM   IP ADDRESS: 96.47.89.215

I would recommend Danny Moncrief 256-794-5198. He has done special steel projects, painting, concrete work, plumbing, brick, etc. He welds, taps steel, etc. Reliable, does a great job and is reasonable.





Name:   wix - Email Member Reply
Subject:   Need recommendations
Date:   8/21/2017 8:20:28 AM   IP ADDRESS: 75.137.200.94

Ease your mind and use stainless bolts in concrete as anchor bolts.  Concrete is rough on reg carbon steel.





Name:   LonghornBoater - Email Member Reply
Subject:   Need recommendations
Date:   8/21/2017 12:15:26 PM   IP ADDRESS: 24.197.59.26

Terry Smith, After Hours Truck Repair, 334-558-1007





Name:   GC - Email Member Reply
Subject:   Need recommendations
Date:   8/21/2017 1:44:35 PM   IP ADDRESS: 64.130.112.34

Thanks!





Name:   GC - Email Member Reply
Subject:   Need recommendations
Date:   8/21/2017 1:45:27 PM   IP ADDRESS: 64.130.112.34

Thanks!





Name:   GC - Email Member Reply
Subject:   Need recommendations
Date:   8/21/2017 1:49:54 PM   IP ADDRESS: 64.130.112.34

Thanks wix.  I can't remember if I used stainless but worry that the concrete walls allow rain in so that the plate gets wet periodically.  I may be overly cautious but don't need it to turn loose with a shi nautique and trailer attached! Lol.

thanks again





Name:   wix - Email Member Reply
Subject:   Need recommendations
Date:   8/21/2017 6:21:00 PM   IP ADDRESS: 75.137.200.94

Another thought, since boat is on a trailer.  Quick fix would be to put wheel chocks behind the trailer wheels and lighten up the tension on the winch.  You could do same even if trailer is on rails.





Name:   jalcz - Email Member Reply
Subject:   Need recommendations
Date:   8/21/2017 6:35:07 PM   IP ADDRESS: 71.29.141.12

All of these replies, and no one has made a "wench" joke yet? This forum is slipping...





Name:   Ulysses E. McGill - Email Member Reply
Subject:   Need recommendations
Date:   8/22/2017 12:09:27 PM   IP ADDRESS: 155.254.13.205

I second the motion on Terry Smith. This is right up his alley.







    Back | Search | Photos | News | Chat | Topics Forum


Quick Links
Bankhead Lake News
Bankhead Lake Photos
Bankhead Lake Videos

About Us
Contact Us
Site Map
Search Site
Advertise With Us
   
www.BankheadLake.info
THE BANKHEAD LAKE WEBSITE

Copyright 2017, Lakes Online
Privacy    |    Legal