Forum Thread
(Lake Allatoona Specific)
10 messages
Updated 9/15/2018 8:58:07 PM
Lakes Online Forum
64,015 messages
Updated 12/9/2019 10:25:58 PM
Lakes Online Forum
5,014 messages
Updated 10/28/2019 11:39:26 PM
(Lake Allatoona Specific)
3 messages
Updated 1/18/2009 7:29:44 AM
Lakes Online Forum
3,931 messages
Updated 12/5/2019 5:17:36 AM
Lakes Online Forum
4,172 messages
Updated 12/9/2019 10:06:09 AM
Lakes Online Forum
2,911 messages
Updated 11/14/2019 9:31:06 AM
Lakes Online Forum
77 messages
Updated 4/15/2019 10:08:33 AM
Lake Allatoona Photo Gallery

    
Name:   Pontoonfisher - Email Member
Subject:   Remove 2-stroke oil pump and premix.
Date:   4/18/2019 7:26:16 PM

Just purchased 2001 Merc 40hp 2 cyl. with low hours. Less than 40.  I have owned several two strokes in the past and never bypassed the oil pump and pre mixed.  Thinking about doing it with this one.  Just wondering the best way. I’m going to remove the linkage from the carb to the oil pump.  Connect the fuel line directly to fuel pump. My debate is to fill the oil pump with synthetic motor oil and connect the input and output ports to circulate the oil or just pull the oil pump gear.  I’m leaning towards pulling the oil pump gear and plugging the oil pump ports.  Anyone done this?  Thoughts?





Name:   Pontoonfisher - Email Member
Subject:   Remove 2-stroke oil pump and premix.
Date:   4/19/2019 7:46:04 AM

FYI - I will have a 1994 Yamaha 25HP (C25ELRS), electric start, electric choke, long shaft (20"), remote steer, great compression with controls for sale after I do the motor swap.  Great motor just wanting a bigger motor.







Quick Links
Lake Allatoona News
Lake Allatoona Photos
Lake Allatoona Videos

About Us
Contact Us
Site Map
Search Site
Advertise With Us
   
Allatoona.USLakes.info
THE LAKE ALLATOONA WEBSITE

Copyright 2019, Lakes Online
Privacy    |    Legal