Boat Maintenance: Winterizing an outboard??
(The Hideout at Lake Ariel Specific)
0 messages
Updated
Lakes Online Forum
83,670 messages
Updated 6/12/2024 10:13:39 PM
Lakes Online Forum
5,197 messages
Updated 6/10/2024 5:39:11 AM
(The Hideout at Lake Ariel Specific)
0 messages
Updated
Lakes Online Forum
4,170 messages
Updated 6/10/2024 6:29:37 PM
Lakes Online Forum
4,261 messages
Updated 5/28/2024 6:31:10 AM
Lakes Online Forum
2,977 messages
Updated 6/10/2024 6:30:23 PM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
|
|
|
Well, Cat is our resident engine man but is tied up with the Cathouse Review that's opening soon in Vegas. I will try to help ya out during is absentee.
After adding your Stabil fuel additive, run the engine for at least 5 to 10 minutes with a muff water source to thoroughly warm the block and circulate the treated fuel through the system. Then,, pull the fuel and as long it's NOT a OptiMax outboard you need to "FOG IT" as it starts to sputter and kick down, Yamaha’s Store-Rite is a good agent I use. ATF in a spray bottle will work in a pinch. This is up to you..... You’ll also want to change the fuel filter and water separator to make it complet. Also a Oil Change at this time can't hurt any thing.
Since it's a out board you need to let the drive all the way down and store it this way. This will let all the water out and keep you from cracking the "FOOT" When left in the up position water will settle in the exhaust base and expand and crack into the gear housing. If in the weather, Bio-shield or Mercury’s Corrosion Guard spray is a nice touch if stored outside This keeps that white crusty aluminium corrosion off during the down season.
I hope this helps and good luck.
Heather Babecki
Spookeay Marine.
|
|
Reply
Back
Search
Boat Maintenance Forum
- 
»
Pennsylvania Lakes
»
The Hideout at Lake Ariel
Login
|
Home
