Bankhead Lake Topics: Drywall question
(Bankhead Lake Specific)
3 messages
Updated 2/8/2012 8:19:41 PM
Lakes Online Forum
83,605 messages
Updated 4/25/2024 9:33:24 PM
Lakes Online Forum
5,193 messages
Updated 4/3/2024 3:47:36 AM
(Bankhead Lake Specific)
0 messages
Updated
Lakes Online Forum
4,169 messages
Updated 4/15/2024 11:05:05 PM
Lakes Online Forum
4,260 messages
Updated 3/24/2024 9:24:45 AM
Lakes Online Forum
2,976 messages
Updated 3/20/2024 11:53:43 PM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
|
|
|
|
Name:
|
DSCR
- 
|
|
Subject:
|
Drywall question
|
|
Date:
|
10/12/2009 9:17:33 AM
|
|
What jlazc said. In addition, when you wet the stain to clean it, it "re-wets" the stains since they are water soluble, and they spread even further or "come back". If there is surface mold involved, use 50/50 water and bleach in a spray bottle, spray it good and let it dry. Then prime with an oil based primer like Kilz, BIN, Cover Stain, etc. If you use a water based primer, it will "re-wet" the stain again and it could migrate through the primer before it can "seal" the stain.
If it is a long term wet issue and mold has "come through" the drywall from the back, then you need to replace it. When the drywall is removed, soak down the joists and such with same said 50/50 solution before the new drywall goes up.
Hopefully, you have smooth ceilings? Makes things much easier.
Good luck!
|
|
Reply
Back
Search
Bankhead Lake Topics Forum
»
Alabama Lakes
»
Bankhead Lake
Login
|
Home
