Lake Hudson Topics: Decking materials

Lake Hudson Topics

(Lake Hudson Specific)

0 messages

Updated

Off-Topic

Lakes Online Forum

83,605 messages

Updated 4/25/2024 9:33:24 PM

Boat Maintenance

Lakes Online Forum

5,193 messages

Updated 4/3/2024 3:47:36 AM

Lake Hudson Fishing

(Lake Hudson Specific)

1 messages

Updated 6/28/2017 10:51:47 AM

Jokes

Lakes Online Forum

4,169 messages

Updated 4/15/2024 11:05:05 PM

Sports

Lakes Online Forum

4,260 messages

Updated 3/24/2024 9:24:45 AM

Grilling & Recipes

Lakes Online Forum

2,976 messages

Updated 3/20/2024 11:53:43 PM

Tallapoosa River Topics

Lakes Online Forum

98 messages

Updated 4/15/2024 1:00:58 AM

Forum Usage Rules

Welcome, Guest

Select View Mode: [ classic | beta | recent ]

	Name:	Lifer -
	Subject:	Decking materials
	Date:	9/14/2012 10:09:09 AM

All good advice so far. The only experience I have with composites is at a friends house. They used composite for their piers/porches. There was not really a problem with the porches due to shading, but the pier was so hot you couldn't stand on it with bare feet in summer. The heat would even transfer through some thin flip flops and swimming shoes if you stood still for a short time. They actually ended up putting a garden hose on the deck to keep it wet so as to be bearable. As Mav said, this may be brand specific, but definitely worth taking the time to research before hand. I seem to remember reading about new technology of using honeycombing of composite decking to reduce density and hence tackle the heat retaining issue. But anytime I mention memory/remembering the info is subject to doubts and questions...lol.

Osms also gave good advice about laying wood in winter as opposed to summer for the drying aspect. I have never thought about that before, but it is very good advice that I will follow in the future if at all possible. The last decking I did was in summer heat and within a couple of years it was in terrible shape with bucking. Also make sure to check each board and lay with the crown up to prevent puddling. I would also use screws only. It makes removal of any bad boards in the future much easier and you never have to pound them back down.