Boat Maintenance: Remove 2-stroke oil pump and premix.
(Lake Pepin Specific)
0 messages
Updated
Lakes Online Forum
63,811 messages
Updated 11/22/2019 9:06:53 AM
Lakes Online Forum
5,014 messages
Updated 10/28/2019 11:39:26 PM
(Lake Pepin Specific)
0 messages
Updated
Lakes Online Forum
3,928 messages
Updated 11/1/2019 2:04:17 PM
Lakes Online Forum
4,170 messages
Updated 11/17/2019 4:54:08 AM
Lakes Online Forum
2,911 messages
Updated 11/14/2019 9:31:06 AM
Lakes Online Forum
77 messages
Updated 4/15/2019 10:08:33 AM
Lake Pepin Photo Gallery

    
Welcome, Guest Select View Mode: [ classic | beta | recent ]
Name:   Pontoonfisher The author of this post is registered as a member - Email Member
Subject:   Remove 2-stroke oil pump and premix.
Date:   4/18/2019 7:26:16 PM

Just purchased 2001 Merc 40hp 2 cyl. with low hours. Less than 40.  I have owned several two strokes in the past and never bypassed the oil pump and pre mixed.  Thinking about doing it with this one.  Just wondering the best way. I’m going to remove the linkage from the carb to the oil pump.  Connect the fuel line directly to fuel pump. My debate is to fill the oil pump with synthetic motor oil and connect the input and output ports to circulate the oil or just pull the oil pump gear.  I’m leaning towards pulling the oil pump gear and plugging the oil pump ports.  Anyone done this?  Thoughts?

Other messages in this thread:View Entire Thread
Remove 2-stroke oil pump and premix. - Pontoonfisher - 4/18/2019 7:26:16 PM
     Remove 2-stroke oil pump and premix. - Pontoonfisher - 4/19/2019 7:46:04 AM

Quick Links
Lake Pepin News
Lake Pepin Photos
Lake Pepin Videos

About Us
Contact Us
Site Map
Search Site
Advertise With Us
   
Pepin.LakesOnline.com
THE LAKE PEPIN WEBSITE

Copyright 2019, Lakes Online
Privacy    |    Legal