(Lake Martin Specific)
111,227 messages
Updated 9/9/2024 7:36:09 PM
Lakes Online Forum
83,974 messages
Updated 9/21/2024 1:06:32 PM
Lakes Online Forum
5,204 messages
Updated 9/14/2024 10:10:50 AM
(Lake Martin Specific)
4,171 messages
Updated 5/29/2024 10:51:34 PM
Lakes Online Forum
4,172 messages
Updated 9/9/2024 5:04:44 PM
Lakes Online Forum
4,261 messages
Updated 5/28/2024 6:31:10 AM
Lakes Online Forum
2,979 messages
Updated 6/26/2024 5:03:03 AM
(Lake Martin Specific)
169 messages
Updated 5/31/2023 1:39:35 PM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
|
|
|
Name: |
Psycho
-
|
|
Subject: |
seadoo engine vibration
|
Date:
|
7/17/2009 9:41:06 PM
|
Had a seadoo brought to me...1998 GTI. Said it had a vibration since they changed the engine a year or two ago. Its not out of alignment like I thought....still has a strong vibration with the driveshaft out....I've noticed thats its not a original seadoo engine...has PMC North America stamped on top of the head. I think that translates into ( made in china by 10 year old boy)lol. I've never ran into a engine with a vibration like this....Thanks for any help you can offer.
|
Name: |
GoneFishin
-
|
|
Subject: |
seadoo engine vibration
|
Date:
|
7/18/2009 4:12:27 PM
|
Hopefully, WEDOSEADOO will read and respond. He is the Seadoo expert.
|
Name: |
CAT BOAT
-
|
|
Subject: |
seadoo engine vibration
|
Date:
|
7/18/2009 10:51:12 PM
|
I'll bet you.... I'll figure it out. Ya got $20 ya wanna bet? Come on lay it out!
|
Name: |
wedoseadoo
-
|
|
Subject: |
seadoo engine vibration
|
Date:
|
7/19/2009 9:19:31 PM
|
I am afraid that you are correct,those engines are copies of a Rotax engine ,made in China, Taiwan or some other unpronouncable asian country,I have had a few of them apart,the thing that really stood out was that they were .75 mm oversized bore which I don't quite understand ,any chances are that the crankshaft was not trued correctly or is now out of true,now either way its not good because it means a complete engine teardown and reassembly and at the least the crankshaft will have to be trued but more than likely it will just need to be replaced.
|
Name: |
Psycho
-
|
|
Subject: |
seadoo engine vibration
|
Date:
|
7/19/2009 10:54:22 PM
|
Thanks for the info. Sounds like the little money saved was expensive in the long run. At its age and condition, I dont think its going to be worth the fix..unless the owner says different.
thanks again, Psycho
|
Name: |
DirtDiva
-
|
|
Subject: |
seadoo engine vibration
|
Date:
|
7/20/2009 2:09:45 PM
|
We have a 97 Sea Doo - a few years back it vibrated very bad. Some of the bolts that secured the engine to (or in) the jet ski cavity were broken off and it allowed the engine to vibrate.
|
Name: |
wedoseadoo
-
|
|
Subject: |
seadoo engine vibration
|
Date:
|
7/20/2009 3:25:18 PM
|
That is a possibility,also check the idle speed if you are not at 1500 rpms in the water or 3000 rpms out of the water it will vibrate like a paint shaker and you will think the world is coming to an end.
|
Name: |
GoneFishin
-
|
|
Subject: |
CAT and $20.00
|
Date:
|
7/20/2009 11:26:19 PM
|
Psycho......lay $20 on CAT to figure it out. He will hook up his CAT dash and pin point your Seadoo vibration. The CAT never fails.
|
Name: |
CAT BOAT
-
|
|
Subject: |
CAT and $20.00
|
Date:
|
7/20/2009 11:35:02 PM
|
I was wondering if anyone wanted/read the bet. Let's do it. Bling it on! $20.00?????? I need it now so you can have it back by the weekend.
|
Name: |
Psycho
-
|
|
Subject: |
CAT and $20.00
|
Date:
|
7/21/2009 8:19:38 AM
|
Thanks for the offer cat, But you are too far away. Besides, this old ski is not worth spending much money on . I think wedoseadoo is right that its the crank. I had already pulled the drive out so I knew the vibration was in the engine. since it had the vibration from the time the engine was put it, I wondered if there was anything they got out of whack that would have caused it....other than a bad crank.
Cat, since you like speed, maybe you can drop in a 4.3 with a mercruiser outdrive? lol
|
Name: |
CAT BOAT
-
|
|
Subject: |
CAT and $20.00
|
Date:
|
7/21/2009 9:17:38 AM
|
That would be funny chit..
|
|
|