Forum Thread
(Lake Martin Specific)
111,143 messages
Updated 4/25/2024 7:30:23 PM
Lakes Online Forum
83,605 messages
Updated 4/25/2024 9:33:24 PM
Lakes Online Forum
5,193 messages
Updated 4/3/2024 3:47:36 AM
(Lake Martin Specific)
4,169 messages
Updated 4/16/2024 3:16:57 AM
Lakes Online Forum
4,169 messages
Updated 4/15/2024 11:05:05 PM
Lakes Online Forum
4,260 messages
Updated 3/24/2024 9:24:45 AM
Lakes Online Forum
2,976 messages
Updated 3/20/2024 11:53:43 PM
(Lake Martin Specific)
169 messages
Updated 5/31/2023 1:39:35 PM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
Lake Martin Photo Gallery





    
Name:   Dinky - Email Member
Subject:   Carpet cleaning
Date:   6/13/2010 11:32:45 PM

Does anyone have a hint or suggestion for getting mold and/or mildew out of the carpet on a pontoon boat?



Name:   Nancy Christine II - Email Member
Subject:   Carpet cleaning
Date:   6/13/2010 11:38:12 PM

Try white vinegar & baking soda and a scrub brush first.
Put down the vinegar then sprinkle on the baking soda thick.
Let it set out of the sun, best to do at night for about 3 Hr's.

If that will not work and the mold has become black, bring out the big guns.

Mean Green Mold and mildew.
But again, do it at night and out of the light. And get it off as soon as you see the mold going away. It's a bleach based product but powerful when all else fails.



Name:   Ulysses E. McGill - Email Member
Subject:   Carpet cleaning
Date:   6/13/2010 11:38:49 PM

Pressure washer....then treat with microban.



Name:   GoneFishin - Email Member
Subject:   Try Looking
Date:   6/13/2010 11:59:44 PM

Best place to post a boat related question is under Boat Maintenance. Go to that topic and do a Search under mold,mildew,carpet. Careful not to mix bleach products with any ammonia products. Good luck.



Name:   Dinky - Email Member
Subject:   Try Looking
Date:   6/14/2010 9:44:08 AM

Thanks....I did try the search, but didn't come up with anything. I like the bigger audience on this part of the forum. Not near as many of us look on the other parts. I didn't really consider this a boat "maintenance" idea because it was carpet oriented, not something mechanical. :)



Name:   Dinky - Email Member
Subject:   Carpet cleaning
Date:   6/14/2010 9:45:40 AM

AFter you treat it, what is the best way to remove the residue? Flood with water, vacuum or blot? Thanks



Name:   Nancy Christine II - Email Member
Subject:   Carpet cleaning
Date:   6/14/2010 9:53:13 AM

Yes flood with water or pressure wash.
The baking soda left over after a wash down can be vacuumed up once dry like a carpet deodorizer in your home is.

If you go the Mean Green route. Lots of warm water to get it out of the carpet once you have your stains broken down and it wont take long to eat the stains, maybe 45 seconds to 1 min. The deal about bleach based cleaners is that it should not stain any thing right away but over time any un rinsed spots can cause quick fading once exposed to the sunlight. Also they can damage and eat up "real" cotton fibers over time.



Name:   Ulysses E. McGill - Email Member
Subject:   Try Looking
Date:   6/14/2010 10:27:19 AM

There has been a lot of discussion on vinyl, but not as much on carpet (from what I remember). My pressure washer is 3500psi and works great with no additional cleaners for mold on boat carpet. I just need to be careful because it could cause damage if done incorrectly. I use some automotive type carpet cleaners for other types of stains such as grease. I order microban from a janitorial supply company called Jon-Don. This is what the pros use for mold treatment in homes and commercial settings. After cleaning, treat the areas with microban to kill the remaining spores and it will significantly slow future growth. Mix up a solution and saturate the carpet with a garden sprayer. Microban is also contained in some household disinfectants you can but at the store, but at much reduced levels.



Name:   Lifer - Email Member
Subject:   One more trick
Date:   6/14/2010 11:04:29 AM

In order to avoid 'bleaching' of the carpet with any of the chlorine products you can pre-rinse the carpet. This will wet the fibers so less, if any, of the fibers will discolor. Remember a 10% bleach solution will kill about anything including the AIDS virus and usually will not alter the color of whatever it touches. Substantial post application rinsing is required. If using a pressure washer use caution not to get to close becasue it will rip up the carpet.

While Heather is correct about not exposing the bleached section to sunlight right away, a moderate amount of regular sunlight will prevent the recurrance in most cases. IMHO a playpen cover should NEVER be put on a boat with wet carpet, but I see folks do it every weekend. The product Mr. McGill recomended is worth a try too. Got to be better than the standard Scotch Guard I have used in the past.







Quick Links
Lake Martin News
Lake Martin Photos
Lake Martin Videos




About Us
Contact Us
Site Map
Search Site
Advertise With Us
   
www.LakeMartin.com
THE LAKE MARTIN WEBSITE

Copyright 2024, Lakes Online
Privacy    |    Legal