Boat Maintenance: But I Have a Question

Lake Wedowee Topics

(Lake Wedowee Specific)

120 messages

Updated 2/27/2024 9:06:20 AM

Off-Topic

Lakes Online Forum

83,605 messages

Updated 4/25/2024 9:33:24 PM

Boat Maintenance

Lakes Online Forum

5,193 messages

Updated 4/3/2024 3:47:36 AM

Lake Wedowee Fishing

(Lake Wedowee Specific)

3 messages

Updated 3/3/2021 9:41:57 AM

Jokes

Lakes Online Forum

4,169 messages

Updated 4/15/2024 11:05:05 PM

Sports

Lakes Online Forum

4,260 messages

Updated 3/24/2024 9:24:45 AM

Grilling & Recipes

Lakes Online Forum

2,976 messages

Updated 3/20/2024 11:53:43 PM

Tallapoosa River Topics

Lakes Online Forum

98 messages

Updated 4/15/2024 1:00:58 AM

Forum Usage Rules

Welcome, Guest

Select View Mode: [ classic | beta | recent ]

	Name:	Maverick -
	Subject:	But I Have a Question
	Date:	7/15/2008 12:41:02 AM

If piston blown, no reason to rebuild the powerhead till you determine what caused the blown piston.

The most common causes of engine failure are detonation, pre-ignition, and overheating or any combination thereof. The result of these problems is that the temperature in the combustion chamber gets too high. As soon as the temperature in the chamber gets higher than normal the engine begins to run poorly and the damage to the engine begins. Detonation is usually caused by the air/fuel mixture being lean and the erosion of the piston starts at the edge or outer diameter of the piston. If the erosion starts in the center of the piston it is probably an ignition problem. An engine running hot due to deteriorated water pump or cooling system blockage compounds the problem.

So even if the powerhead is rebuilt if you do not correct the orignal issue which caused the failure then next thing you know you have another blown piston.

But Cat is the expert here not me and I am sure if he rebuilds the powerhead he will properly diagnose the orignal issue which caused the failure in the first place.